NGODFREYMARTENS1GO NGODFREYMARTENS1GO

Engineering

Answered

PLEASE HELP THIS IS A TEST I WAS SUPPOSE TO DO 8 HOURS AGO.

An object has a width of 1.0 in. if you were to create a 1:4 scaled drawing of this object, what would the dimensions of the drawing be?

Answer :

BRYNNULVILA85GO BRYNNULVILA85GO

The only dimension you gave me is the width so I will work with that. If it’s asking for a smaller drawing than what is giving then the width will be 1/4 inch but if you’re saying the drawing is bigger then the width will be 4 inches

Answer Link

Go Question: Other Questions

Which Angles Are Complementary To Each Other? Select All That Apply.

Brainliest For Correct Answer! To Program A Digital Turtle To Trace The Outline Of A Hexagon, What Code Should Be Used? forward 50 repeat 6 [forward 50 Right 60

A Universal Set U Consists Of Elements. If Sets A, B, And C Are Proper Subsets Of U And n(U), n(A B)n(A C)n(B C), n(A B C), And N(A B C), Determ

Please Help Asap Find X

When The Mean, Median, And Mode Are All The Same

If The Measures Of Arc=122 Find The Measure Of Angle B

5. What Does Laura Have In Common With Dequan And Isabel? a. They All Got Cut From The Soccer Team Tryouts. b. They All Think They Are Not Good Enough To Play S

Work Out The Value Of N When A = 2 And B=3n=4a +6b

Compare The Current In The 8-ohm Resistors To The Current In The 4-ohm Resistors. Compare The Current In The 3-ohm And 8-ohm Resistor To The Current In The 10-o

Nina Visited An Area That Receives A Large Amount Of Precipitation During All Twelve Months And Is Typically Warm Year Round. The Area Also Has A Large Variety

Round 25446 To 1 Significant Figure

Help Please Quick Pleasseeee